The Stingray vs. Traditional DSP's

The Stingray DSP Mixer from Phoenix Audio Technologies is revolutionizing the telecommunications industry. View a side by side comparison between a traditional DSP versus The Stingray DSP Mixer. The Stingray is the only DSP mixer in the industry that requires no programming or certifications! 

Stingray (1)

Pre-Installation

The Stingray

To install The Stingray no certifications or special training is required!

Traditional DSP

Traditional DSP's require certified installers or audio engineers to complete the installation and set up.

Set Up

The Stingray

To set up the Stingray all you have to do is plug it in! You can configure it to a mic or line input via the web GUI or the front panel in less than 60 seconds.

Traditional DSP

Configuring and setting up traditional DSP's can take audio engineers or certified installer hours, if not days of programming and testing. 

Versatility

The Stingray

The Stingray can be wall mounted behind a monitor or can be placed in a credenza. No matter the room configuration the Stingray can adapt and fit in any environment.

Traditional DSP

Once a traditional DSP is installed it is typically very difficult to move it around. A certified installer or audio engineer would have to come back out to move, re-install, and reconfigure the device. 

Bottom Line

The Stingray

The Stingray is a plug-and-play device that requires zero programming!

Traditional DSP

Traditional DSP's are expensive and complicated to install and use.

 The choice is clear, The Stingray is the future for DSP's. Experience the simplicity of the Stingray yourself.

 

 

Get a Demo